Analyzing Images via CTL

Introduction

In this section you will learn how to analyze images with Anchore Enterprise using AnchoreCTL in two different ways:

  1. Distributed Analysis: Content analysis by AnchoreCTL where it is run and importing the analysis to your Anchore deployment
  2. Centralized Analysis: The Anchore deployment downloads and analyzes the image content directly

Using AnchoreCTL for Centralized Analysis

Overview

This method of image analysis uses the Enterprise deployment itself to download and analyze the image content. You’ll use AnchoreCTL to make API requests to Anchore to tell it which image to analyze but the Enterprise deployment does the work. You can refer to the Image Analysis Process document in the concepts section to better understand how centralized analysis works in Anchore.

sequenceDiagram participant A as AnchoreCTL participant R as Registry participant E as Anchore Deployment A->>E: Request Image Analysis E->>R: Get Image content R-->>E: Image Content E->>E: Analyze Image Content (Generate SBOM and secret scans etc) and store results E->>E: Scan sbom for vulns and evaluate compliance

Usage

The anchorectl image add command instructs the Anchore Enterprise deployment to pull (download) and analyze an image from a registry. Anchore Enterprise will attempt to retrieve metadata about the image from the Docker registry and if successful will initiate a pull of the image and queue the image for analysis. The command will output details about the image including the image digest, image ID, and full name of the image.

# anchorectl image add docker.io/library/nginx:latest
anchorectl image add docker.io/library/nginx:latest
 ✔ Added Image 
Image:
  status:           not-analyzed (active)
  tag:              docker.io/library/nginx:latest
  digest:           sha256:89020cd33be2767f3f894484b8dd77bc2e5a1ccc864350b92c53262213257dfc
  id:               2b7d6430f78d432f89109b29d88d4c36c868cdbf15dc31d2132ceaa02b993763

For an image that has not yet been analyzed, the status will appear as not_analyzed. Once the image has been downloaded it will be queued for analysis. When the analysis begins the status will be updated to analyzing, after which te status will update to analyzed.

Anchore Enterprise can be configured to have a size limit for images being added for analysis. Attempting to add an image that exceeds the configured size will fail, return a 400 API error, and log an error message in the catalog service detailing the failure. This feature is disabled by default so see documentation for additional details on the functionality of this feature and instructions on how to configure the limit.

Using AnchoreCTL for Distributed Analysis

Overview

This way of adding images uses anchorectl to performs analysis of an image outside the Enterprise deployment, so the Enterprise deployment never downloads or touches the image content directly. The generation of the SBOM, secret searches, filesystem metadata, and content searches are all performed by AnchoreCTL on the host where it is run (CI, laptop, runtime node, etc) and the results are imported to the Enterprise deployment where it can be scanned for vulnerabilities and evaluated against policy.

sequenceDiagram participant A as AnchoreCTL participant R as Registry/Docker Daemon participant E as Anchore Deployment A->>R: Get Image content R-->>A: Image Content A->>A: Analyze Image Content (Generate SBOM and secret scans etc) A->>E: Import SBOM, secret search, fs metadata E->>E: Scan sbom for vulns and evaluate compliance

Configuration

Enabling the full set of analyzers, “catalogers” in AnchoreCTL terms, requires updates to the config file used by AnchoreCTL. See Configuring AnchoreCTL for more information on the format and options.

Usage

The anchorectl image add --from [registry|docker] command will run a local SBOM-generation and analysis (secret scans, filesystem metadata, and content searches) and upload the result to Anchore Enterprise without ever having that image touched or loaded by your Enterprise deployment.

# anchorectl image add docker.io/library/nginx:latest --from registry
anchorectl image add docker.io/library/nginx:latest --from registry -n
 ✔ Added Image 
Image:
  status:           not-analyzed (active)
  tag:              docker.io/library/nginx:latest
  digest:           sha256:89020cd33be2767f3f894484b8dd77bc2e5a1ccc864350b92c53262213257dfc
  id:               2b7d6430f78d432f89109b29d88d4c36c868cdbf15dc31d2132ceaa02b993763

For an image that has not yet been analyzed, the status will appear as not_analyzed. Once the image has been downloaded it will be queued for analysis. When the analysis begins the status will be updated to analyzing, after which te status will update to analyzed.

The ‘–platform’ option in distributed analysis specifies a different platform than the local hosts’ to use when retrieving the image from the registry for analysis by AnchoreCTL.

# anchorectl image add alpine:latest --from registry --platform linux/arm64

Adding images that you own

For images that you are building yourself, the Dockerfile used to build the image should always be passed to Anchore Enterprise at the time of image addition. This is achieved by adding the image as above, but with the additional option to pass the Dockerfile contents to be stored with the system alongside the image analysis data.

This can be achieved in both analysis modes.

For centralized analysis:

# anchorectl image add myrepo.example.com:5000/app/webapp:latest --dockerfile /path/to/Dockerfile

For distributed analysis:

# anchorectl image add myrepo.example.com:5000/app/webapp:latest --from registry --dockerfile /path/to/Dockerfile

To update an image’s Dockerfile, simply run the same command again with the path to the updated Dockerfile along with ‘–force’ to re-analyze the image with the updated Dockerfile. Note that running add without --force (see below) will not re-add an image if it already exists.

Providing Dockerfile content is supported in both push and pull modes for adding images.

Additional Options

When adding an image, there are some additional (optional) parameters that can be used. We show some examples below and all apply to both distributed and centralize analysis workflows.

# anchorectl image add docker.io/library/alpine:latest --force
 ✔ Added Image                                                                                                                                                                                                                             docker.io/library/alpine:latest
Image:
  status:           not-analyzed (active)
  tags:             docker.io/alpine:3
                    docker.io/alpine:latest
                    docker.io/dnurmi/testrepo:test0
                    docker.io/library/alpine:latest
  digest:           sha256:1304f174557314a7ed9eddb4eab12fed12cb0cd9809e4c28f29af86979a3c870
  id:               9c6f0724472873bb50a2ae67a9e7adcb57673a183cea8b06eb778dca859181b5
  distro:           [email protected] (amd64)
  layers:           1

the --force option can be used to reset the image analysis status of any image to not_analyzed, which is the base analysis state for an image. This option shouldn’t be necessary to use in normal circumstances, but can be useful if image re-analysis is needed for any reason desired.

# anchorectl image add myrepo.example.com:5000/app/webapp:latest --dockerfile /path/to/dockerfile --annotation owner=someperson --annotation [email protected]

the --annotation parameter can be used to specify ‘key=value’ pairs to associate with the image at the time of image addition. These annotations will then be carried along with the tag, and will appear in image records when fetched, and in webhook notification payloads that contain image information when they are sent from the system. To change an annotation, simply run the add command again with the updated annotation and the old annotation will be overriden.

# anchorectl image add alpine:latest --no-auto-subscribe

the ‘–no-auto-subscribe’ flag can be used if you do not wish for the system to automatically subscribe the input tag to the ’tag_update’ subscription, which controls whether or not the system will automatically watch the added tag for image content updates and pull in the latest content for centralized analysis. See Subscriptions for more information about using subscriptions and notifications in Anchore.

These options are supported in both distributed and centralized analysis.

Image Tags

In this example, we’re adding docker.io/mysql:latest, if we attempt to add a tag that mapped to the same image, for example docker.io/mysql:8 Anchore Enterprise will detect the duplicate image identifiers and return a detail of all tags matching that image.

Image:
  status:           analyzed (active)
  tags:             docker.io/mysql:8
                    docker.io/mysql:latest
  digest:           sha256:8191525e9110aa32b436a1ec772b76b9934c1618330cdb566ca9c4b2f01b8e18
  id:               4390e645317399cc7bcb50a5deca932a77a509d1854ac194d80ed5182a6b5096
  distro:           [email protected] (amd64)
  layers:           11

Deleting An Image

The following command instructs Anchore Enterprise to delete the image analysis from the working set using a tag. The --force option must be used if there is only one digest associated with the provided tag, or any active subscriptions are enabled against the referenced tag.

# anchorectl image delete mysql:latest --force
┌─────────────────────────────────────────────────────────────────────────┬──────────┐
│ DIGEST                                                                  │ STATUS   │
├─────────────────────────────────────────────────────────────────────────┼──────────┤
│ sha256:8191525e9110aa32b436a1ec772b76b9934c1618330cdb566ca9c4b2f01b8e18 │ deleting │
└─────────────────────────────────────────────────────────────────────────┴──────────┘

To delete a specific image record, the digest can be supplied instead to ensure it is the exact image record you want:

# anchorectl image delete sha256:899a03e9816e5283edba63d71ea528cd83576b28a7586cf617ce78af5526f209
┌─────────────────────────────────────────────────────────────────────────┬──────────┐
│ DIGEST                                                                  │ STATUS   │
├─────────────────────────────────────────────────────────────────────────┼──────────┤
│ sha256:899a03e9816e5283edba63d71ea528cd83576b28a7586cf617ce78af5526f209 │ deleting │
└─────────────────────────────────────────────────────────────────────────┴──────────┘

Deactivate Tag Subscriptions

Check if the tag has any active subscriptions.


# anchorectl subscription list
anchorectl subscription list
 ✔ Fetched subscriptions
┌──────────────────────────────────────────────────────────────────────┬─────────────────┬────────┐
│ KEY                                                                  │ TYPE            │ ACTIVE │
├──────────────────────────────────────────────────────────────────────┼─────────────────┼────────┤
│ docker.io/alpine:latest                                              │ policy_eval     │ false  │
│ docker.io/alpine:3.12.4                                              │ policy_eval     │ false  │
│ docker.io/alpine:latest                                              │ vuln_update     │ false  │
│ docker.io/redis:latest                                               │ policy_eval     │ false  │
│ docker.io/centos:8                                                   │ policy_eval     │ false  │
...
...

If the tag has an active subscription(s), then can disabled (deactivated) in order to permit deletion:

# anchorectl subscription deactivate docker.io/alpine:3.12.6 tag_update
 ✔ Deactivate subscription
Key: docker.io/alpine:3.12.6
Type: tag_update
Id: a6c7559deb7d5e20621d4a36010c11b0
Active: false

Advanced

Anchore Enterprise also allows adding images directly by digest / tag / timestamp tuple, which can be useful to add images that are still available in a registry but not associated with a current tag any longer.

To add a specific image by digest with the tag it should be associated with:

anchorectl image add docker.io/nginx:stable@sha256:f586d972a825ad6777a26af5dd7fc4f753c9c9f4962599e6c65c1230a09513a8

Note: this will submit the specific image by digest with the associated tag, but Anchore will treat that digest as the most recent digest for the tag, so if the image registry actually has a different history (e.g. a newer image has been pushed to that tag), then the tag history in Anchore may not accurately reflect the history in the registry.

Next Steps

Next, let’s find out how to Inspect Image Content

Last modified February 13, 2024